DIY Beer Tower

Posted by raredog in A.U.T.S., ... | 06.27.2013 - 10:08 am




One day, my neighbor brought home a scrap plastic tubing with lid on both ends. He said it acts as a spool for a sticker. With nothing to do that day. I decided to make something out of it that I could bring on apogee jam at musicians friend and company.

 

 

I look for available materials around and found the following stuffs that would fit in this DIY project of mine – some nylon ties, sandpaper, silicone gel, glue gun, orange paint spray can, a used clutch disc which was only a few minutes detached from a taxi that was being repaired by my neighbor haha! It act as my base for the beer tower. And lastly the only material I bought for only P20, a push-type faucet.

 

The procedure is just simple. Paint the clutch disc. Sand the tube and lid, put some silicon on both before attaching it to each other. Then put some glue at the bottom for added stability. Drill 8 holes to place the nylon ties before placing it on top of the clutch disc. Zip the ties. That’s it! Happy drinking! 😀


No Comments on "DIY Beer Tower" »

No comments yet.

Leave a comment